My brake car perform poorly.
Previously I have replace single layer servo with double layer servo.
But I seem it did not change anything.
Then I remember there is an aftermarket product (2nd picture) to increase vacuum for brake servo.
I use water bottle to replicate that product.
Connect a hose to the bottle end and the other hose connect to brake hose (connect after one way valve).
AAs a result, I can feel better brake performance and less use feet power to brake.
Monday, January 12, 2015
Vacuum booster for brake servo
Door Unlock Switch
Usually in old car and using aftermarket alarm, there is no dedicated switch to unlock door.
So people put a reset switch at a dashboard to unlock the door without pulling the unlock knob.
When I replace alarm into my car, I have extra reset switch and I use that switch as door unlock switch.
It's very convenient place to put unlock switch instead put it at dashboard.
Subscribe to:
Posts (Atom)
Expand storage for Openwrt router
If he router has very low storage, in my case router is DIR-842. Here is tutorial to expend storage using USB flash drive. Original guide i...
-
Bismillah dan Assalamualaikum. Dah lama sangat blog ni sunyi sepi. Tak banyak aktiviti teknikal yang belaku sepanjang kesepian itu. Ada sik...
-
Silvertop TPS sensor: 89452-12080 or 89452-22080 same p/n as 2JZGTE, 3RZFE, 2RZFE, 5VZFE Blacktop TPS sensor: 89452-12090 Silvertop I...
-
Assalam dan selamat sejahtera. Kali ni aku try coil over plug (cop) setup kat kete aku. Takder ape special pun, tapi saje menggatal nak pak...