Surprisingly that the intake air temp is significantly reduce. The temp reduce more than 10 deg Celsius when at the toll and temp also take lot of time to ride to max.
So it's very big improvement by only install a shield.
Go to : Hot Air Shield
Thursday, June 21, 2012
Intake air temperature with hot air shield
After I've installed intake hot air shield, I've measured again the intake air temp.
Surprisingly that the intake air temp is significantly reduce. The temp reduce more than 10 deg Celsius when at the toll and temp also take lot of time to ride to max.
So it's very big improvement by only install a shield.
Go to : Hot Air Shield
Surprisingly that the intake air temp is significantly reduce. The temp reduce more than 10 deg Celsius when at the toll and temp also take lot of time to ride to max.
So it's very big improvement by only install a shield.
Go to : Hot Air Shield
Subscribe to:
Post Comments (Atom)
Expand storage for Openwrt router
If he router has very low storage, in my case router is DIR-842. Here is tutorial to expend storage using USB flash drive. Original guide i...
-
Bismillah dan Assalamualaikum. Dah lama sangat blog ni sunyi sepi. Tak banyak aktiviti teknikal yang belaku sepanjang kesepian itu. Ada sik... -
Assalam dan selamat sejahtera. Kali ni aku try coil over plug (cop) setup kat kete aku. Takder ape special pun, tapi saje menggatal nak pak... -
Silvertop TPS sensor: 89452-12080 or 89452-22080 same p/n as 2JZGTE, 3RZFE, 2RZFE, 5VZFE Blacktop TPS sensor: 89452-12090 Silvertop I...
No comments:
Post a Comment