Cold Air Intake (CAI) Temp Recorded

Hi all, before this I've post on how I did a CAI hose to my car (refer to this link).

Then here is a prove that CAI is not just a wasted accessory. I put the thermometer probe at the outlet of the CAI hose and before stock airbox inlet.

I start measure the air temp at 8:00 am along Jalan Gambang-Muadzam Shah. It's quite cold in the morning. The air temp is low as 26.5 degree Celsius. 

At 8:00 am

 At 3:00 pm, the temp recorded at 34.5 degree Celcius. Actually it fluctuate between 34-36 degree Celcius. This temp are recorded at Jalan Muadzam Shah-Bahau. Our body temp is higher than this. Body temp is 37 degree Celcius.

At 3:00 pm

And you must be wondering what is the temp when car not running and at stop condition? Yes, here is the answer.

Car on stop with engine running

So, the conclusion is CAI is really help engine to get fresh and colder air from outside.

Cold Air Intake CAI for my AE111

Hi all, long time I've not update any progress done to my car. So here is another mod. Cold Air Intake or CAI.

My engine still using normal air filter box, if i can avoid hot air goes into combustion chamber I can gain extra power from it. CAI is not use to eliminate hot air, but is use supply colder air to air filter.
The theory is, colder air contain more oxygen. With more oxygen, engine can get near to perfect combustion thus can produce more power.

I do not show how to remove the bumper in this thread.

First thing is remove the white part. Need to remove 2 screw and loosen 1 screw as per picture below.

Then make a mark as I need to make the hole larger to fit the CAI hose. I use stone bit and grind it until large enough to fit the hose.

I just drill the hole just fit enough the CAI hose. So, to fit the hose in, I turn around the hose like fastening a screw. 

My little assistance doing his job.

How it look like after fit back the bumper