Thursday, March 1, 2012

AE111 twin pot replacing front disc and brake pad

In this thread I will show how I modified 5 hole disc to 4 hole and fit it into my AE111. Since my brother left his DC5 disc at my house, I will use his disc to fit into my car. This is tool that I use beside of the hand drill
Disc marked before drill
And here is 4 hole already drilled
To fit the disc into my car, firstly took out tyre and rim then took out caliper. Here is the picture in the process. Before started
By using this type of clamp, I push the brake pad further away so that easier when to install new disc
Remove this 2 screws that hold caliper
Then I hang the caliper to avoid caliper hanging only with brake hose
Test to fit modified disc rotor
Cheap brake pad that I used
New brake pad install
Then install back caliper into knuckle
Comparison before and after
Put wheel and ready to go. p/s:before that make sure continuously pump brake until feel brake pad grip before start driving

4 comments:

  1. Nak tanya, caliper ini jenis model apa? Jenis model ae111 ke?

    ReplyDelete
  2. Caliper ini sudah modified ke belum?

    ReplyDelete

Expand storage for Openwrt router

If he router has very low storage, in my case router is DIR-842. Here is tutorial to expend storage using USB flash drive.  Original guide i...